You were right about the pressure. I put a pressure snubber and 0-350 psi sender and it reads 170-180 psi at about 1/2 full IDC. It's hard for me to get to 100% IDC with 1000 cc injectors!
I have saved several good pics of the installation. Waiting to create some data logs with various fluid combos, pre and post turbo, and with dyno data!
Excellent kit. I've been testing the failsafe before I change my tune, both low flow and high flow conditions - works pretty well!
EDIT: Actually I had a question about the failsafe. The manual does not indicate what the failsafe sensitivity trimmer adjustment range is. How quickly can I get the failsafe to send an error signal when it detects a problem?
EDIT: Never mind, found Richard's excellent post here (should be added to the manual):
http://www.aquamist.co.uk/vbulletin/...6&postcount=20