Re: Finalizing install on a 3.5L Ecoboost, a few last questions...
Just got clarification from XDI, the supplier of my injectors. I do have peak & hold injectors. This is per Uwe Ostmann at XDI:
"A port injector “peak and Hold Driver” is also not strong enough to drive DI injectors. Those are usually 8A/4A, for DI injectors you need 12A/8A/3A"
Does that mean I need to use the green harness? If so, how is the wiring specifically?
Last edited by diaz1510; 05-01-2021 at 08:07 PM.
|