View Single Post
  #26  
Old 11-09-2012, 06:01 AM
Cptn_Sol Cptn_Sol is offline
Junior Member
 
Join Date: Aug 2012
Location: Moscow, Russia
Posts: 13
Default Re: Install HFS-3 on DI engines - any need to connect MAP sensor?

The first question is fixed!

Ive turned GAIN clockwise up to the end.

So that, on the 3rd gear at full throttle ive got point of starting injection at 3000 rpm, the IDC 95% starts at 4500 at full throttle.

IDC 95% with 0.5 jet gives 200cc/min.

Looks like optimal for 1.6T engine, what do you think?

Road test passed OK.

Can you send the flow table on the email wich is in my profile? Tnx a lot! If you have some intructions what to do - it will be much better!

Tnx!
Reply With Quote