22-05-2016, 09:29 PM
|
Senior Member
|
|
Join Date: Jun 2013
Location: malta
Posts: 210
|
|
Re: Flow vs Pressure
Quote:
Originally Posted by Richard L
- You should not have any trace of water in the methanol. Even absorb from the water vapour from the air over time. Leave the fuel injector
This issue will rise only if I use fuel injectors instead of nozzles right or will effect the primary pump fuel injectors?
- High pressure demands high current. Hight current means heat rise. The Aquatec specification is quite vague, " ... some pump can run for hours .... "
Agreed... need to clear this out with Aquatec...
- I cannot see a valve that will work at 450psi at 1600cc/min. Certain not from us.
Jus posted one I already have from Hamlet able to work in the 3000psi region, don't know the flow though
|
...................
|