Quote:
Originally Posted by robos4
Hey Parmas,
Sorry I meant I had problems without meth on the stock engine (when I rebui8lt it), cyl 4 was damaged due to running too lean. It must be a poor design from the intake manifold as it's obviously not getting equal flow. (the injectors were flow tested and came back fine).
Putting a jet just before throttle body in my mind wouldn't help me cure my cylinders receiving un even flow still.
Rob
|
You are using stock intake right?
Are you saying that Mitsubishi designed a poor design?
If that is the case I would consider making a custom one that will provide equal flow to all the cylinders and use one pre throttle body.
Water/meth could help but the setup is not right.