Thread: Setting WL
View Single Post
Old 21-02-2018, 06:56 PM
tezlum tezlum is offline
Junior Member
Join Date: Jan 2018
Location: Canada
Posts: 26
Default Re: Setting WL

After I solder the 1.5x scaler will all the aquamists setting now be based off the scaled injector values so if I set the threshold at 18 it would trigger when the Inj DC is at 12. Then can I use the gain to scale back the jets DC will it work if I have the gain at -25% the gain will be now 1:.75 vs the default gain of 1:1
Reply With Quote