View Single Post
  #3  
Old 19-12-2015, 10:56 PM
jondee86 jondee86 is offline
Member
 
Join Date: Dec 2015
Location: New Zealand
Posts: 78
Exclamation Re: JET PLACEMENT FOR AIR FLOW (POST-MAF)

This picture purports to illustrate the benefits of a recessed tip nozzle...


http://www.alcoholinjectionsystems.c...rticles_id=100

... and is lifted from a competitors site strictly for discussion purposes

The spray is always going to be "sheared" by the high velocity airstream
passing the nozzle tip. However it seems logical to me that if the spray can
be more finely divided prior to entry, it will diffuse more quickly into the
airstream.

Probably not an issue if there is a resonable length of intake duct between
the injection point and the intake runners. But in my case the duct will most
likely be very short and getting the mist well mixed with the intake air for
equal distribution to all cylinders not so easy.

Cheers... jondee86
Reply With Quote