View Single Post
  #6  
Old 16-01-2012, 08:03 PM
g's 3rd gen g's 3rd gen is offline
Junior Member
 
Join Date: Dec 2011
Location: daytona, USA
Posts: 1
Default Re: Aquamist 2d Install ? on an FD?

You ned to rewire the green wire to the secondary injector (light green) on a n fdrx7. You do not want to tap the greddy elbow as it will strip because the aluminum is too thin to support threads. Buy one of these http://www.howertonengineering.net/p...Weld-Bung.html and have it welded to it for long term use. If you buy the bung also purchase the plug http://www.howertonengineering.net/p...king-Plug.html I just did this complete system on my fdrx7. G

Last edited by g's 3rd gen; 16-01-2012 at 08:08 PM.
Reply With Quote