View Single Post
  #11  
Old 17-01-2012, 10:34 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Aquamist 2d Install ? on an FD?

The aquamist will follow exactly what the primary injector is doing in 50%. If the injector is throws out a 50% of fuel, aquamist willdo the same for water. This is mirrored electromechanically.

The actual flow (cc/min) will be based on the flow at 100% of the size of the injectors and size of the water jet.


Unfortunately the weird staged primary injector makes things difficult for the water injection to flow linearily based on thr primary injection signal:

Primary: ... 0 ............. 25% ................ 50 %->25% .................. 100%
Secondary: 0 ...............0........................ ..... 25% ................... 100%

Based on the above sequence, it is better to tap the signal from the secondary fuel injector. If you want to track fuel below 25% iDC, you need add a "RX7 summer module". Details on the earlier link I posted.
__________________
Richard L
aquamist technical support
Reply With Quote