View Single Post
  #67  
Old 10-11-2017, 04:35 AM
jondee86 jondee86 is offline
Member
 
Join Date: Dec 2015
Location: New Zealand
Posts: 78
Smile Re: Nozzle spray angle...

The contaminated mix has cleared quite a bit but still looks "dirty" after
sitting for more than a week undisturbed. It seems uniform with no apparent
phase separation or sediment, but there is a thin oily/waxy film floating on
the surface that is evident when the container is held to the light.

Now the replacement 20 litres of methanol has turned up, and when tested
exhibited no milkiness whatsoever when mixed with water. The mixture
remained just as clear as the individual components. So onward and upwards

Cheers... jondee86
Reply With Quote