Re: Nozzle Problem
Hi,
Thanks for the quick response there was not much debris in the nozzle well not enough to block it.
what caused it to block was the inner piece of the nozzle (copper or brass piece thats swirly in shape and has a nipple at end with outlets on either side) by the looks of it screwed itself so tightly in that it didnt allow any wm out the nozzle.
this happend on both nozzles..
i have put 2 brand new nozzles in from my local dealer...
he says im running on full gain (5 o clock) so could be that there is so much pressure it screwed itself shut..
any ideas?
|