[Arthurwiljami]

Thanks for sharing. This is about the same what I was after although I?m already running almost 850cc/min (@2bar of boost) which is something +900cc/min at free flow. so I?m not sure where are the limits of the pump if I added two extra jets but looks like I would be OK if adding 2x 0.3mm jets.

btw What are the 0.3mm filtered jets for as they are different for normal jets? Are they ment to be used externally due the filtering?

Was thinking of adding 2x T-pieces to the same place where the current T-piece is to split the 4mm hoses to both intake pressure pipes.