View Single Post
  #6  
Old 14-01-2013, 08:50 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,897
Default Re: L200 2.5 Commonrail

Try this option first

Circuit board underside modifications
1. cut off the PWM (-) link
2. solder link PWM (+) pads
3. cut off x1 link
4. Solder link x2.5 pads

Wiring changes:
5. disconnect green wire of the grey harness from injector (-)
6. Connect yellow wire of grey harness to the injector (+)

Let me know how you get on.
__________________
Richard L
aquamist technical support
Reply With Quote