View Single Post
  #2  
Old 15-02-2006, 07:59 PM
koji_kabuto koji_kabuto is offline
Junior Member
 
Join Date: Apr 2005
Posts: 1
Default

i have looked into hydrogen peroxide too and i dont know..if you inject about 500cc/m of hydrogen peroxide w 35% concentration, thats about 140cc of the actual stuff..then it breaks down to 2 parts oxygen to be mix with hydrogen and we get only 1 part o2.. i just think you get more o2 just by raising the boost, 10 extra cfm of air is more o2 than 140cc of water and o2 dont you think?
then too much concentration will starve the cylinders from nitrogen, i dont know if water or steam is fast enough to absorb the cylinder heat before the engine blows or melt. it might even mess up the wi pump or make it incosistent since compressing water heats up and the peroxide will start its breakdown during compression.. so its going to be injecting water and bubles at the sametime. plus its an oxidant. the pump,jets, everything will corrode faster.. but eventually i will try the 5% over the counter or 35% since ive never done it before. who knows, its rocket fuel after all
Reply With Quote