Re: Flow sensor testing
- Iīve had system for years so no wrong wiring setup. After upgrading fueling setup havenīt got it to work.
- Sensor does rotate but no flow is detected at all, not even system test mode.
- According to your descript the flow sensor seem to be OK.
- yellow harness you mean the WFS wire?
The picture shows what the gauge looks during system test.
- no leds in bargraph
- w.injection and water level leds are on.
Is this correct except no flow detected?
What should I check next?
Last edited by Arthurwiljami; 22-04-2017 at 09:08 AM.
|