Hi Richard,
yes, please have a look:
http://34plus2.jimdo.com/
a precision 6266 is feeding a roots blower.
it was supercharged before with one intercooler.
now compound supercharged, two intercoolers.
turbo - intercooler - bov - throttle body - blower -intercooler - 2 x plenums (opposed aircooled engine).
1)i was thinking about one nozzle after the first intercooler before the throttle body to cool the blower rotors 50/50 mix meth / water.
2) or just spraying 100% meth 2 nozzles before each plenum. about 10 inch away from the intake valves.
no meth controller.
i may get some kind of heat soaking from the aircooled engine even with the interoolers.
i would like to run higher boost levels up to about 2 bar oder 30 psi.
compound boost usually kicks in instantly when you start hitting the throttle.
each unit runs about 50 to 50. if tjhe turbo has 1 bar, supercharger will multiply it to 2 bar for example.
european pump gas 102 octane will be used.
thanks
steven
berlin germany