[flyinryanp]

talked to jeff at howerton thinks i might need new controller. but to answer your questions to see if he might of missed something. the red wire has power the blue wire is the ground. i ground blue wire pump start bot contoller will not ground relay to switch. the yellow light on the red harness doesnt come on. the inj link is connected. did you need a picture to see if the link on the pwm terminal is connected to the bottom of the tree termals because it is. the water level indicater works and it show s on the gauge. i also checked continuity from blue wire at relay to blue rj connector. ive also double and triple checked all grounds. the fcm doesnt click either. but the controller reconizes it there. it also passed the first test in the manual to see if connected properly. ive already contacted vivid to see about getting replacement parts but still happy to recieve more imput to make sure the fault in the system thankyou