Thread: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)
View Single Post
  #24  
Old 15-03-2015, 03:55 AM
Chriswolf81 Chriswolf81 is offline
Junior Member
  
Join Date: Jan 2014
Location: US
Posts: 22
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)
Yes I can confirm all the above. I see .7-.9 when i get continuity.

I will reconnect everything. I have the resistor soldered onto that ground wire already. This is exactly how it was wired after I changed it from the brown wire to the black wire.

I have DHB linked.

So if it still doesn't work, my ground wire/resistor has an issue? I want to say I used a 220 ohm resistor.

I will report back. Thank you for all your help
Reply With Quote