Some little progress, I had to speed up things since the car is going to be remapped next Saturday, it was last minute news for me, because the appointment was actually 2 weeks later. So I don?t have time to build every as I wanted but I will try to build so much as possible, some things on next pictures will be temporary.
2 nozzles on my custom made IC-TB pipe here:
Here a overall picture on the pipe:
Here I was started to build de solenoid assembly on stainless plate with holes:
Here the finished version all wired up including the turbo pressure sensors, 2 pipes from IC-TB pipe will be connected to those 2 brass water pressure sensors, this is completed fully working assembly I only need 12V and some wires for the leds to make it work, I used another pipes since the first one too stiff to work with in such small assembly, but all other pipes will be see through.
This is a small box to monitor things, but it is temporary, I used smaller pressure gauge than I posted before:
