Hi,
thanks for that,
my engine produces max torque at 4250 rpm and im limiting max to 5700rpm. Its a centrifugal blower so max psi will be at max rpm. Im going to use a 0.4mm aquamist nozzle but im using an adjustable pressure water pump ( 40-120 psi) and will adjust to get around 10% of the fuel usage at max rpm. My guess is the engine will use 16 gph at max rpm so i will adjust pressure for 1.6 gph from the nozzle. Does all this sound OK?
I haven't got the engine running with the blower yet, but as water screws up the readings from my Wideband Lambda sensor iv got to turn the correction off in the ecu when the water is turned on. So i might as well get the ecu to turn the water on. If Im doing that i might as well have a good control for the switch on i.e. Manifold air temp, Revs, Boost.
Phil
www.replica-cobra.co.uk