Quote:
Originally Posted by Richard L
In this case of both led activates, it indicate a failsafe trigger, nothing to do with the water level sensor.
- "Low tank level" led on = water fluid level
- "Water injection" + "water level" led on = failsafe trigger
- Both led off = normal
Which one of the above statements is not true?
|
Normally when not injecting and driving under the threshold both LED's are off.
If the failsafes are set properly only the water level light comes on under any instance when the threshold has been meet or exceeded
If they WL is set wrong to simulate no flow or the blue harness is unplugged so the pump doesn't run then both lights come on