I am not sure either, but any 8000 series Shurflo that has pressure of 100-150 psi at 3 litre/min upwards will do.
You will need a couple of valves to inject the water near full throttle. (drag racing applications)
If you are using it for street as well, you will need a more progressive controller to meter the water. May be a MF2 and a couple of HSV will do nicely. Not sure wherecan one find a RPM signal from a diesel engine.
MF2 reads two signals: boost and RPM to product a 2-D map, but with an addition of a MAP sensor, the unit will allow you to work in 3-D mode.
Does your engine have these signals as stock?
__________________
Richard L
aquamist technical support
|