View Single Post
  #8  
Old 28-04-2016, 12:55 AM
jondee86 jondee86 is offline
Member
 
Join Date: Dec 2015
Location: New Zealand
Posts: 78
Question Re: Nozzle spray angle...

Personally, I am inclined to think that placing the nozzle in the tube just
before the inside of a bend would result in the best mixing.



Using this simulation as a reference, and assuming that the spray is swept
away and remains quite close to the nozzle side wall, the spray would then
be turned around the inside radius of the bend where flow separation and
turbulance occurs. This should promote better dispersion and mixing of the
air and water.

However, this remains just a theory without any valid indication of exactly
how the spray penetrates the airstream once it leaves the nozzle.

Cheers... jondee86
Reply With Quote