View Single Post
  #6  
Old 01-08-2010, 12:17 PM
IDI IDI is offline
Junior Member
 
Join Date: Jul 2010
Posts: 6
Default Re: WI on IDI 1.9 Turbo Diesel

It's not an aquamist kit. (I'm not sure it's ok to mention other vendors on here?) It consists of a sureflo 8000 series, a check valve and two nozzles/holders. Was described as Universal Diesel and came with 2 x 6gph nozzles after which I bought a 3gph and 1gph nozzle - the recommended size for my engine.

No you're quite right and I don't believe the sales hype straight off. I read as much as I could from varying sources on the 'net and it all seemed to back up what the sellers promise.

Specifically, people that have the very same engine as mine have reported great benefits in both power and EGT reduction. Problem is, they're few and far between and those I've managed to contact, can't or won't give me any specific details of what, if any differences, there are between my state of tune and theirs. Even if they did, nothing I've read explains why I get knock at 40/50% meth when others can run 100% without such problems.
Reply With Quote