View Single Post
  #1  
Old 31-07-2018, 09:18 PM
Fahadalamiri Fahadalamiri is offline
Junior Member
 
Join Date: Jul 2018
Location: Dubai
Posts: 5
Exclamation Code p2563 for MK7 R

Hi Richard,

This Fahad from Dubai. I'm using aquamist hfs-4 for my Golf R Mk7. I had this fault code P2563 since one month. I tried to clear the code by deleting it, removed the battery and finally disabled the fail safe from the jumper but still the code pops up once i turn on the ignition. The aquamist and the car are working fine. I had a small problem that my car goes to limp mode once the it starts spraying the Water Methanol but its not doing that anymore, and recently i found out from the logs that i had a small boost leak and i fixed that. Any idea what would be the problem for this code P2563? I read a lot about it and shows that the actuator is not working properly so please could you confirm it before i start taking out the turbo and i have the latest version of the VCDS.
Reply With Quote