Re: Failsafe activating after shift.
WL is full CCW, WH is full CW, and FLSF SENS is full CW so the parameters for the failsafe window are fully open.
Per the instructions on pg9 of the manual:
0.5mm restrictor .................... 0 - 380cc/min
0.7mm restrictor .................... 0 - 680cc/min
0.9mm restrictor .................. 0 - 1080cc/min
From memory I believe I needed 550-600cc/min so I used the 0.7mm inline restrictor in the FCM. Let me know if I should have used the 0.9mm or none at all.
|