View Single Post
  #9  
Old 17-08-2019, 11:36 PM
BlwnAway BlwnAway is offline
Junior Member
 
Join Date: Feb 2018
Location: St. Louis Mo US
Posts: 24
Default Re: HFS-3 Tests O.K., but No Bar.Graph During.Operation

Richard, sorry for the delay in response, no spare time during my work week.

Electrical connections appear fine, good contacts and I've been very careful, throughout assembly to not accidentally connect to the wrong ports in the board.

As for the actual physical flow.
I removed and carefully disassembled the FAV assembly.
I can blow through the filter housing tube, but hear no audible whir or flutter in the air.
I also then disassembled the tube assembly to reveal the E clip, removed it, but the assembly seemed fairly solidly installed into the assembly tube and didn't want to force anything without some instruction as to the actual procedure.
I cannot however blow through the FAV "T" at all.

Just let me know what next.
Thanks.

Last edited by BlwnAway; 17-08-2019 at 11:45 PM.
Reply With Quote