Re: No flow reading from water injection!
Richard,
I did the test and there is a turbine-like sound, but the bargraph is not illuminating even blowing 100psi air in the turbine...
I redid the test with the nozzle spraying on the windshield, and its spraying good but not bar on the gauge again
Anything else I can test?
What wire can I test for continuity on the yellow harness with a multimeter (at the connector)?
Can the controller be tested with the test points on the board6
I really want to eliminate all possibilities before buying new stuff and having to pass more wire though the damn grommet...
|