question for Richard.....

redvictor · #1 11-11-2005, 12:09 AM

Richard,have you got the CC per minute rating of your jets? i have 4 x .8mm and 8 x .4mm jets.I'm going to use all 4 of the .8s and 4 of the .4s.Looking to have 720cc per minute capability.....

AndrewC · #2 11-11-2005, 05:21 PM

Is this what you're after?

http://www.aquamist.co.uk/sl/plist/pic2/jets/jets.html

redvictor · #3 13-11-2005, 03:27 PM

that'll do nicely....thanks.

Richard L · #4 14-11-2005, 09:17 PM

Quote:

Originally Posted by redvictor

Richard,have you got the CC per minute rating of your jets? i have 4 x .8mm and 8 x .4mm jets.I'm going to use all 4 of the .8s and 4 of the .4s.Looking to have 720cc per minute capability.....

The flow rating of the jets are as follows:

http://www.aquamist.co.uk/sl/plist/pic2/jets/jets.html

I believe the system, we built for you is capable of 1 litre per minute at 100psi. 12 jets all together?

Richard

It would be easier for me to spot your post if you could post it to the ERL/Aquamist section in the future if you have a question for me.

Richard

redvictor · #5 15-11-2005, 11:24 PM

thanks for the reply Richard. I'm going to use the 4 jets in the plate and 4 of the jets from the ports into the pipe after the IC at 10psi and over.Also 4 of the remaining jets will be used for intercooler evaporative cooling.I'm also going to use Ethanol and water instead of methanol....