#1
|
|||
|
|||
Jet size for 2010 Audi s4 3.0t engine direct port?
I can't seem to find any info on what the stock injectors put out on this engine. Anyone have any idea what size jets to run for a direct port application (6 jets)?
I have an hfs6 that i will be using. Hate to buy 6 valved jets @ ~$55ea and be the wrong ones. Will be pusing about 13-15psi. 50/50 meth Thanks! |
#2
|
|||
|
|||
Re: Jet size for 2010 Audi s4 3.0t engine direct port?
After finding out more info on the tfsi engine, is it even possible to use an aquamist system since there really isn't a set idc?
|
#3
|
|||
|
|||
Re: Jet size for 2010 Audi s4 3.0t engine direct port?
Yes, we have setup many kits for the TFSI. Roughly you can say 1.5 x the HP for jetting, or for a 300hp engine, 450cc.
|
#4
|
|||
|
|||
Re: Jet size for 2010 Audi s4 3.0t engine direct port?
Quote:
Will the hfs6 work for the DI engine? Or do I need a hfs4 for this car? |
#5
|
|||
|
|||
Re: Jet size for 2010 Audi s4 3.0t engine direct port?
The HFS-6 is not setup to work with this injector setup. In the past it was modified to work, but the new systems do it much better. The 6 was discontinued a few years ago and other than spare parts supplies, is not supported in that manner.
|
|
|