#1
|
|||
|
|||
Special Setup on Subaru Impreza STI MY2002
Hello together
I actually use Aquamist with one nozzle 0.7mm I have the original top mount intercooler from Subaru and the nozzle is setup directly on the intercooler (see picture below) Now i get a bigger intercooler (also top mount) and i want made a new setup. I will put in the nozzle in the hose (see also picture below). Have anybody here in this forum already made a construction like this and can give me some tipps or are there some pictures about this, please post it. Thank you very much for your awnsers Mario from Switzerland
__________________
Drive with the best or Die like the Rest |
#2
|
|||
|
|||
Mario, when I used to have my Impreza I had the jet in the throttle body with good results. Samco make a pipe that sits between the intercooler and the throttle body that has a holder that is setup for holding a jet.
Fish |
#3
|
|||
|
|||
Thank you Fish
For your information and tipps. Have anybody els some intresting setup pictures from Aquamist on Subaru Impreza MY 2002 ? Please post it here in this thread Thank you much Cheers Mario from Switzerland
__________________
Drive with the best or Die like the Rest |
#4
|
|||
|
|||
special inlet for the hose
Hello together
I found a special thing to put inside a hose. Have anybody already some experience with this kind to implenment here the jet of the aquamist ? Please have a look on the picture below Klick on picture for bigger view You can found it here : http://www.isa-racing.de/20074/JPG%2.../Seite-237.jpg
__________________
Drive with the best or Die like the Rest |
|
|