#1
|
|||
|
|||
Aquamist worked, but not after re-install
Summary: My Aquamist worked, I took it off the car, then re-installed, now it doesn't work.
Stuff: I have an older "kit", that includes the race pump, HSV, Manifold, and the relay. I'm controlling the WI with a Split Second AIC. I verified that the 12v switched power is still getting 12v power. I verified that the HSV still works (it clicks when I blew in the vacuum tube of the Split Second). I verified that the inline fuse is good. The only thing that doesn't seem to be working is the pump. What am I missing??? All I did was cut the wires when I un-installed it, and to reinstall, I just connected all the wires again. I'm stumped.
__________________
99 Mazda MX-5 - FFS MP62 hotside, JR Powercard Pro, e-Cool, BTB, FFS Fuel Rail, Aquamist WI, FM springs, KYB AGX, Azenis, HDSDD, 200HP+ |
#2
|
|||
|
|||
Is there a way to make the pump run like a diagnostic just so I know the pump is still working?
__________________
99 Mazda MX-5 - FFS MP62 hotside, JR Powercard Pro, e-Cool, BTB, FFS Fuel Rail, Aquamist WI, FM springs, KYB AGX, Azenis, HDSDD, 200HP+ |
|
|