#1
|
|||
|
|||
Delta Integrale recommendation
Hi Everyone,
I have been reading all of the posts lately as I want to buy an aquamist setup. Eventhough everything is quite clear, a bit of help would be nice. About the car ; Lancia delta HF integrale. 2.1L turbo 16v. CR 9:1 750cc injectors High lift cams, forged internals COP setup Aim peak pressure : 1.4bar, around 20 PSI Power output goal : between 350 -400 bhp 750cc x 4 = 3000cc injectors. Want to run W50M50 15% of fuel. So, 0,15x3000 = 450cc 165 psi – 20 = 145 PSI on the chart. Was thinking about 2 jets from 0,5 and 0,6 mm for a total of 450cc. Correct ? Are these reasonable numbers ? The 750cc injectors are a bit overkill as I would expect to have no more than 60% dutycycle. Thanks anyways! Probably the first Integrale on meth I suppose Best regards Jth Last edited by JTH16v; 31-08-2015 at 06:09 PM. |
#2
|
|||
|
|||
Re: Delta Integrale recommendation
Good numbers!
I will be responding to your emails when I return to office. |
#3
|
|||
|
|||
Re: Delta Integrale recommendation
I will be responding to your emails when I return to office.
__________________
Richard L aquamist technical support |
#4
|
|||
|
|||
Re: Delta Integrale recommendation
Thanks Richard!
|
|
|