#1
|
|||
|
|||
Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
I will be working towards compiling wiring diagrams for as many makes of cars as possible for the HFS-3. I, of course need help from all your guys who owns the car to supply me as much information as possible, with feedback.
I would be grateful if you guys can post some installation images and share the experiences with others. Richard
__________________
Richard L aquamist technical support Last edited by Richard L; 06-03-2010 at 10:06 PM. |
#2
|
|||
|
|||
__________________
Richard L aquamist technical support Last edited by Richard L; 06-03-2010 at 09:52 PM. |
#3
|
|||
|
|||
Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
nice pics there richard... will be good help
|
#4
|
|||
|
|||
Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
I will try to make more of theres drawings for other cars. It would be nice if people will post some of imechanical work on the HFS-3 install.
I can't wait for the tephra's ALT-MAP for the EvoX.
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
great schematic Richard definatley cleared things up for me.
did the basic wiring today, il get started on the ecu tapping by next weekend. |
#6
|
|||
|
|||
Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
ok thanks Richard the diagrams work 100% for a JDM 8MR, thanks.
|
#7
|
|||
|
|||
Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
If you have an opportunity to take some pictures of the install if possible.
__________________
Richard L aquamist technical support |
#8
|
|||
|
|||
Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
For the JDM EVO8 MR i am supposed to tap wire 64 for Tephra map switching failsafe, however I am not seeing any wire there...am I supposed to place my own wire there?
|
#9
|
|||
|
|||
Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
Yes, the slot is empty. I am not sure where you can get the pins form . there is someome on the evom.net selling a pre-wired cable.
Richard
__________________
Richard L aquamist technical support |
#10
|
|||
|
|||
Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
Hi Richard, can you post up a diagram for EVO X (EDM/ADM/JDM) with failsafe using Tephra Alt-Map switch via ECU pin 115?
|
|
|