#1
|
|||
|
|||
Ask help Richard HSF4V3. 1 transformation models
HI Richard:
I am Chinese!I can only say my problem in incorrect English! I bought it is 997.2TT waterinjection。 I want to use it in the BMW M4! I read the instructions carefully! The module was adjusted,But I don't know if the back of the circuit board need to be changed。 The picture is as follows!1.jpg look forward to yor reply Last edited by silencefeel@163.com; 13-07-2018 at 04:16 AM. |
#2
|
|||
|
|||
Re: Ask help Richard HSF4V3. 1 transformation models
SORRY My english is very low,I would also like to learm,circuit board on six adjustments , ho to adjust the knob? to be mine,the waterjection system better running and working!
Last edited by silencefeel@163.com; 13-07-2018 at 04:21 AM. |
#3
|
|||
|
|||
Re: Ask help Richard HSF4V3. 1 transformation models
THRES: 10am
P/I-R: 1pm GAIN: 12pm FSDL:12pm AUXFS: 12pm Jumper links are good. reinstate DFS to PRK after successful installation.
__________________
Richard L aquamist technical support |
#4
|
|||
|
|||
Re: Ask help Richard HSF4V3. 1 transformation models
Do you have the M4 wiring diagram?
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
Re: Ask help Richard HSF4V3. 1 transformation models
NO,I don't have a line chart
|
#6
|
|||
|
|||
Re: Ask help Richard HSF4V3. 1 transformation models
What is it DFS OR PRK
|
#7
|
|||
|
|||
Re: Ask help Richard HSF4V3. 1 transformation models
I’m so excited to see your reply,Didn't say thank you
|
#8
|
|||
|
|||
Re: Ask help Richard HSF4V3. 1 transformation models
__________________
Richard L aquamist technical support |
#9
|
|||
|
|||
Re: Ask help Richard HSF4V3. 1 transformation models
|
#10
|
|||
|
|||
Re: Ask help Richard HSF4V3. 1 transformation models
DFS = disable fail safe
PRK = parking an unused jumper .
__________________
Richard L aquamist technical support |
|
|