#1
|
|||
|
|||
Which way to 50/50?
I have access to
1. 95%M5%E at 400 yen for 1L. 2. Battery water (distilled?) for 100 yen for 1L. 3. Windshield wiper fluid, no bubbles is 185 for 2 liters at 40% methanol, 4. Bubbly fluid at 45%M, 175 yen for 2 Liters and 5. no bubbles 50%M for 400 yen for 2 liters and I have a brita water filter that is not used for drinking. I just lost an IAC valve at $400 and I feel, without seeing it, that it got some residue in it and caused it to short out. So i am looking at maybe running something safer for my car parts. I have been back and forth between 25 and 50% meth, but being that I have 64 hp(government mandated), even with upped boost, I can't really feel a difference in the two. 25% meth would obviously allow me to spray cheaper. What mix and what fluids should I be using? |
#2
|
|||
|
|||
Re: Which way to 50/50?
What system do you have?
If you have a pump speed system without an inline solenoid valve, they tend to dribble after off-throttle. This is due to pressurised line contracting. The longer the line, the more dribble.
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: Which way to 50/50?
Until I get a car that can be tuned I see no reason to upgrade. Been reading about and eying the HFS-3, and have a folder full of messages from Howerton, but until I get back to the states from here in Japan, the 21 oz. engine with no tuning options will just get enough fluid to keep the temps down.
|
|
|