|
#1
|
|||
|
|||
HFS-6 post-GB: general
Any topic on the HFS-6
__________________
Richard L aquamist technical support |
#2
|
|||
|
|||
impatient answer testing :lol:
|
#3
|
|||
|
|||
Just because Aaron posted I want to be a part of this as well.
|
#4
|
|||
|
|||
I want to post also.
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
Richard, I have a question pertaining to my particular setup. With the adjustability of the HFS-6 in terms of duty-cycle vs. fuel, which nozzles would it make the most sense to use in my direct-port setup? I currently have (4) 0.4mm nozzles, and (4) 4-scroll 0.3mm nozzles. I will be running 450cc injectors.
|
#6
|
|||
|
|||
Quote:
1. I have not been playing around with those control panels for a while, so a quick test post was the order of the day. :? 2. I have not been able or learn to delete this thread, so rather risking in crashing the entire forum, I changed the heading of this thread. ops:
__________________
Richard L aquamist technical support |
#7
|
|||
|
|||
Aaron
JETS = Aquamist Nozzles = those other people |
#8
|
|||
|
|||
I can use both terminologies
__________________
Richard L aquamist technical support |
#9
|
|||
|
|||
Quote:
|
#10
|
|||
|
|||
Quote:
|
|
|