|
#1
|
|||
|
|||
Motec m800 supra turbo with Aquamist 2C
__________________
MoTeC M800 Supra 533 RWHP @ 21 psi |
#2
|
|||
|
|||
Do you have a few more pictures of the install?
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Yes, I do. The pump is right behind the front license, in front of the intercooler. The pressure switch and injector are shown on top of the Intercooler.
|
#4
|
|||
|
|||
This is a real interesting place to pump the water pump, nice and low, pretty dry as well.
Great pictures. Thanks. Is your water tank in the back?
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
Quote:
--Ron |
#6
|
|||
|
|||
Richard, the plug on the bottom part of the manifold, oppossite of the pressure switch, can I take that off and put a pressure gauge/sender instead? what is its size?
Thanks.
__________________
MoTeC M800 Supra 533 RWHP @ 21 psi |
#7
|
|||
|
|||
Quote:
You can use any spare port, they are all connected internally. The thread size is 1/8 BSP bot 1/8 npt will fit - require a little bit of PTFE. Just a matter iof interest, does the pump get water splashed?
__________________
Richard L aquamist technical support |
#8
|
|||
|
|||
[quote="Richard L"]
Quote:
<<<You can use any spare port, they are all connected internally. The thread size is 1/8 BSP bot 1/8 npt will fit - require a little bit of PTFE.>>> Thanks! <<<Just a matter iof interest, does the pump get water splashed?>>> You mean when driving in the rain? I would imagine it would get some water splashed onto it, why? I have the connector/plug tied up and behind the bumper where water does not get to. --Ron |
|
|