#1
|
|||
|
|||
HFS-6: Setting up the fail-safe?
HFS-6 osa User Manual v4w
Page 6; right column, 3rd paragraph: 8-feet of two-core cable from the FCM is intended for fail-safe purposes. It activates a low-power 3- way solenoid valve to by-bass boost pressure to the wastegate. In the event of a fail-safe activation, it will lower the boost down to the mechanical fail- safe setting. This option is normally intended for use with a manual boost controller and some step per-motor based electronics boost controller. My question is, what if you are not running a MBC or a EBC? Boost is controlled through the DME in the BMW N54 engines. How would i go about hooking up a fail-safe? Thanks in advance. Tee
__________________
OverBoostinBimmers 08 EVO X 08 E90 335i 09 E82 135i "Light travels faster than sound. This is why some people appear bright until you hear them speak." |
|
|