Can you please see my questions below. Thanks.
Quote:
Originally Posted by Ilkka
Is there any way to tell the absolute amount of flow by looking at the flow meter? There is a legend on the gauge which reads 100 to 400 ml/min, but is that with what SC trimmer setting? If that's with 'centre' setting, how is the legend changed when SC is set to max?
|
Quote:
Originally Posted by Ilkka
|
Quote:
Originally Posted by Ilkka
With the FDC linked, I'm getting full 8 bars above ~5000 rpm. ECU calculated fuel injector DC is ~75% at 5000 rpm. Does 8 bars mean that the HFS-3 is seeing already 100% DC. How can that be when the real DC is only 75%?
|