#1
|
|||
|
|||
Gauge Power problems
Hello Guys,
I have HFS-3 system installed on my Porsche 997tt. The problem is; The system is working and i have 5-6 bars of flow, but while going WOT, sometimes gauge loses power and it comes back very quickly in about half seconds. It goes off and on again 2-3times during a 60 to 270km run. What can be the cause? My findings; - Take of the plug of WATER LEVER sensor. - Seperate the BLACK/WHITE grounds from each other. - Check the resistance of the grounds. - Check WL AND WH. (I have already set them to the limits. WL 7 o'clock, WH 5 o'clock, so i dont think that im reaching the failsafe) Anymore ideas? Thanks, Emre |
|
|