![]() |
#1
|
|||
|
|||
![]()
Hi there ;
I want to share with you my long time and hard work project ; I own the car since 10 years and got it serious from 3 years now (performance part) . The engine is a 7afe block with 4age head . The shorted mods list ; ;hks gt3037 , gt2 wastegate, bov, cam gear and timming belt ; Autronic engine management ; pauter rod with arias piston (9.8/1 CR ) ; custom intake , manifold , exhaust , piping etc ; davies craig electric water pump with controller ; electric power steering pump from renault . the car ; ![]() electronics boxes ; ![]() the engine ; ![]() intake manifold jet emplacement ; I place the intake temp sensor after the jets but I think it will be heat soaked. I'm not sure if I'll be better to change is location ? ![]() 2D system ; ![]() on the car ; ![]() ![]() intercooler and oil cooler mount ; ![]() turbo and manifold ; ![]() engine bay ; ![]() I want to run 4x .3 jets with .4 or .5 jet after intercooler . I'm not sure also if the best location for the 5th jet is not just before the throttle body . I have to test the system and plug the dds3 options before running and tune it . Time is against me because I have to store the car for the winter in two weeks . Next year will be the one for the project. Comments and suggestion are welcome ! Claude Last edited by frotou; 24-10-2010 at 12:24 AM. |
|
|