#1
|
|||
|
|||
HFS-6 in 2004 Subaru STi
Installed a HFS-6 kit into friends/client's Sti the other weekend.
We utilized the stock trunk tmic reservoir, but installed float switch & inlet. Ran the 6mm "hard line" where the factory had routed their lines. The electrical harness was routed through the rear seat / trunk support with the 6mm "hard lines". The only thing you see that has to do with Aquamist in the trunk is the pump. The engine was given the same treatment. The only clue is the injectors and their lines. Tried to cover everything we could with wiring covers.
__________________
02 WRX faux STi ESX TMIC, P/P VF-30 (Deadbolted), P/P Throttle Body, Colder NGK Plugs Undrive Pulley, GP-Moto Header, K&N Helix / Invidia TBE, Tein, STi Aquamist 2D system 287 whp & 262 ft-lbs @ 16 psi 3XX whp & XXX ft-lbs @ 19 psi |
|
|