#11
|
|||
|
|||
Re: Aquamist HFS-3 system for 2010 ..... "Q and A"
I have successfully installed and followed the power-up procedure in the manual but now I am having a problem getting the system to prime out the 6mm hose when i disconnect it from the FAV.
I turn the IGN to the "on" stage with the jumper on the INJ prongs, then when the dash gauge starts up I remove the INJ jumper and put it on the SYS prongs as instructed in the manual. Then after about 5secs I can hear the pump click and the water level light turns on despite being about 60% filled with water. I have the pre-built HE kit so pretty sure the level sensor is fine. thanks in advance.
__________________
ಠ_ಠ 2001 EVOLUTION VII - 2.4L + AQUAMIST
|
|
|