Settng up MAP only unit.

[Wayne in NZ]

OK.

So I have got the Threshold point where I want it.
Do the other trimpots still serve the same functions as a non MAP unit?
I am having an issue with getting the system to "progress" nicely.
Start point is 11"HG (-5psi approx) and I want full at +5psi.
It seems to want to be at full flow by atmosphere.

I am using the 0.9mm restrictor, 1 x 0.7mm jet and 1 x 0.8mm jet.

Any suggestions would be appreciated.

Regards

Wayne