![]() |
#1
|
|||
|
|||
![]()
Hi all,
car is 996tt with gt30s turbos, upgrade fuel system 80cc injectors and trying to run in the end about 1.6 bar or more. Car is running a bit rich even without meth, lambda set point is 0.8 and actual values are 0.78-0.8 most of the time i tried with W60/M40 on defaul mapping (IDC) and after that W45/M55 on a custom mapping (MPS) and the same result, i see lambda going down to 0.73, engine load gets very high and engine is coughing I am told i need to start injecting by 7 psi and full at 15 psi, any thoughts ? thanks a lot Fadi |
|
|