#1
|
|||
|
|||
Multi Port WI, Nozzle Placement
I working on a multi port WI system, to ensure even water distribution. The nozzles will be placed in the individual runners of the intake manifold and the engine uses a turbo.
I want to have minimal evaporation before entering the cylinder, but I also want to place the nozzles at the right angle. I can have them situated either around 6 inches before the intake valve but they will spray at the same angle as the flow of air ie horizontal, or I can place them just before the head and have the nozzles at between 45-90 degrees to the air flow. Any thoughts? Thanks Phil |
|
|