waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Intercooler Effects

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 06-02-2006, 07:04 AM
mrex180 mrex180 is offline
Member
 
Join Date: Mar 2004
Location: AUSTRALIA
Posts: 56
Default

Thanks, so far with out tuning and running low boost 13-14psi the actual response isn't any better down low and through the midrange than before, it's only when the tacho goes past 5k that i can notice the real difference and the restriction that the stock IC presented is gone it really shifts through the revs quickly.I'm running 2 x 0.5mm jets , i'm unsure of the pressure, the pressure switch is left set at what ever came from the factory with 2c Kit but i will try and get it set to max pump pressure.. Can't wait to get the Knocklink and couple of other little things sorted and get 19psi flowing. :twisted: i can also here the boxer rumble coming through the induction side too sounds wierd.. And i can't really get a good temp measurement as the stainless piping is holding the engine bay heat so looks like i'll have to get a AIT sensor & gauge.

Andy
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 04:51 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.