#11
|
|||
|
|||
Re: Aquamist Jet Thread Pitch and Side (Inlet Side)
I have some of these old-style jets too (that are new) I'd like to use. I want to thread in an adapter so I can go straight to a 4mm quick connect elbow.
So, what's the pitch of the 1/4" thread? Is it really 25 TPI?! 1/4" - 28 would be more convenient |
#12
|
|||
|
|||
Re: Aquamist Jet Thread Pitch and Side (Inlet Side)
I believe it is UNC 20TPI for the old jet
M6 x 0.5mm for the current jets
__________________
Richard L aquamist technical support |
Thread Tools | |
Display Modes | |
|
|