#1
|
|||
|
|||
2001 Audi S4 2.7T - Stage 3- - Giac Software
For reference ... my setup is as follows
PJk04 turbos Giac 3- + 5bar FPR Darintake ER's Aquamist W/M Piggies Milltek ***This is not a full stage 3 setup*** Running on 93 octane and power is approx 300whp ... Ok the question, Where should i set the trip-adj at ???? With my current setup the injectors get buried and actually reach a 140% IDC. I'll link a few charts, if any other charts would help lmk and i'll see if i can procure them from the same run. thanks! [/img] |
#2
|
|||
|
|||
Boost reference is not that suitable because there is no further WAI enrichment after wastegate pressure.
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
all the charts/logs i have are here for that particular run
http://www.customperformancesolution...p_ers/logs.php |
|
|